亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

servo cylinder Sold to Colombia

Release time:2023-12-08 14:41:26 Hits: Current position: Home > News

This article mainly introduces:

Colombia hydraulic cylinder,servo cylinder manufacturer,servo cylinder

Colombia servo cylinder

(Colombia servo cylinder,produced by Hengyu Hydraulic Co., Ltd)

servo cylinder are widely used in Colombia,because of excellent fatigue and impact resistance,long service life,simple structure and reliable operation.So our company has designed servo cylinder for customers from Colombia.

Introduction to servo cylinder:

When the servo cylinder is in use, ensure that the servo cylinder and the surrounding environment should be clean. The tank should be sealed to prevent contamination. Pipelines and fuel tanks should be cleaned to prevent falling off the oxide sheet and other debris. Clean with lint-free cloth or special paper. Twine and binder should not be used as sealing materials. Hydraulic oil according to the design requirements, pay attention to the change of oil temperature and oil pressure. When there is no load, unscrew the exhaust bolt for exhaust.

When installing the servo cylinder, the axial ends of the servo cylinder cannot be fixed. Due to the effect of liquid pressure and thermal expansion in the servo cylinder, there is axial expansion. If the two ends of the servo cylinder are fixed, all parts of the servo cylinder will be deformed. When disassembling the servo cylinder, it is strictly forbidden to hammer the servo cylinder and the piston surface, such as the servo cylinder hole and the piston surface is damaged, do not allow sandpaper grinding, to use a fine oil stone carefully grinding. The clearance between the guide sleeve and the piston rod should meet the requirements.

The scar on the sliding surface of the servo cylinder piston will transfer with use. Before the piston is installed, there are scars on its sliding surface, which are installed intact and untreated, and these scars will in turn scratch the inner surface of the servo cylinder wall. Therefore, before installation, these scars must be fully repaired.

servo cylinder piston rod material introduction: In general, we use 45 steel to produce servo cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

Answers to some questions about servo cylinder:

How to calculate the tonnage of the hydraulic press? Example: The input cylinder pressure is 5Mpa, the end area of the cylinder piston is 100mm, and how much is the thrust tonnage?
F=P*S=5*10^6*3.14*(1/20)^2=39250N.

Why does the cylinder pop out of itself when it stops?
This situation has two possibilities, 1. There is more air in the system, so exhaust the gas. 2. The back pressure of the oil return is relatively large, check the oil return filter, check whether the cylinder has a rod cavity buffer is too tight, and choose a 3-position 4-way M-type valve for the reversing valve. In addition, after the shutdown, manually change the reversing valve back and forth several times, it should not rise out.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
亚洲精品熟女一二三| 韩国一本偷拍免费自拍 | 综合激情婷婷欧美| 大香蕉超碰1| 婷婷五月天中文字幕在线观看| 嗯嗯啊嗯啊哦免费视频| 超碰羞羞99| 青娱乐日本性爱| 欧美精品 - 色网| 调教丝袜在线观看91| 白白色德国精品操逼视频免费播放| 69AV激情| 蜜臀AV中文字幕少妇| 东阳市| 国产区19页16p| 女生小视频网址| 成人看逼逼| 午夜久久咪咪视频| 九青热草夜视频在线观看免费| 被大鸡巴猛操视频| 欧美抽插小穴视频| 欧洲,美洲亚洲视频一区二区三区| 日本人妻丝袜诱惑| 又大又粗熟妇国产| 嗯嗯,不要,太大了日本视屏| 情欲AV一区二区| 午夜福利禁| 色喲哟18| 国产香蕉美女视频| 色鬼网站无码| 人人操人人肉人人莫| 97资源站com超碰在线| 日本精品人妻一区| 美日韩一级在线免费| 亚洲人妻一区二区| 一区二区三区字幕| 日产一区不卡| 男女啊啊啊啊几把| 大香蕉大香蕉大香蕉日本大香蕉视频| 一本区道大香蕉| 偷拍自拍小穴|