亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

hoister hydraulic cylinder Sold to America

Release time:2023-11-12 15:33:22 Hits: Current position: Home > News

This article mainly introduces:

America hydraulic cylinder,hoister hydraulic cylinder manufacturer,hoister hydraulic cylinder

America hoister hydraulic cylinder

(America hoister hydraulic cylinder,produced by Hebei Hengyu company)

hoister hydraulic cylinder are widely used in America,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed hoister hydraulic cylinder for customers from America.

Introduction to hoister hydraulic cylinder:

hoister hydraulic cylinder hydraulic oil selection: The recommended working oil viscosity of the hoister hydraulic cylinder is 10 ~ 110cSt (1.8 ~ 15E), ISO VG46 hydraulic oil. The normal working oil temperature is 10 ~ 70℃, and the ambient temperature is in the range of -20 ~ 80℃. When the ambient temperature and service temperature are low, the hydraulic oil with lower viscosity can be selected.

If the hoister hydraulic cylinder operation failure, you can start from these aspects to troubleshoot: (1) the hydraulic system control pressure is too low. The throttling resistance in the control line may be too large, the flow valve is improperly adjusted, the control pressure is inappropriate, and the pressure source is disturbed. At this time, the control pressure source should be checked to ensure that the pressure is adjusted to the specified value of the system; (2) Air enters the hydraulic system. Mainly because there is a leak in the system. At this time, check the liquid level of the hydraulic tank, the seals and fittings on the oil suction side of the hydraulic pump, and whether the oil suction filter is too dirty. If so, the hydraulic oil should be replenished, seals and fittings should be treated, and the coarse filter element should be cleaned or replaced. (3) The initial action of the hoister hydraulic cylinder is slow. In the case of low temperature, the hydraulic oil viscosity is large, poor flow, resulting in slow hoister hydraulic cylinder action. The improvement method is to replace the hydraulic oil with better viscosity and temperature performance If the hoister hydraulic cylinder is weak and cannot push the load, please check the internal leakage problem. The internal leakage of the hoister hydraulic cylinder includes the leakage caused by excessive wear of the hoister hydraulic cylinder block seal, the piston rod and the seal cover seal and the piston seal. The cause of sealing leakage between the piston rod and the seal cover is that the seal is wrinkled, squeezed, torn, worn, aging, deterioration, deformation, etc., and a new seal should be replaced at this time. The main cause of excessive piston seal wear is improper adjustment of the speed control valve, resulting in excessive back pressure and improper seal installation or hydraulic oil contamination. The second is that foreign bodies enter the assembly and the quality of sealing materials is not good. The result is that the action is slow and weak, and in serious cases, it will cause damage to the piston and hoister hydraulic cylinder, and the phenomenon of "pulling the hoister hydraulic cylinder" appears. The treatment method is to adjust the speed control valve, and the necessary operations should be done according to the installation instructions.

Under normal circumstances, the hoister hydraulic cylinder is composed of the rear end cover, body, piston, piston rod and front end cover and other main parts. In order to prevent the working medium from leaking out of the hoister hydraulic cylinder or from the high pressure chamber to the low pressure chamber, a sealing device (sealing ring) is arranged between the hoister hydraulic cylinder and the end cover, the piston and the piston rod, the piston and the hoister hydraulic cylinder, the piston rod and the front end cover. A dustproof device is also provided on the outside of the front end cover. In order to prevent the piston from impacting the end cap when it moves rapidly to the end of the stroke, the end of the hoister hydraulic cylinder can also be provided with a buffer device. If necessary, the exhaust device should be set in order to exhaust.

When producing oil hoister hydraulic cylinders, there are two processing processes, grinding and rolling, the latter is better than the former. Rolling machining is a kind of non-cutting machining, using the plastic deformation of the metal at room temperature, so that the micro roughness of the workpiece surface is flattened to achieve the purpose of changing the surface structure, mechanical characteristics, shape and size. Therefore, this method can achieve the two purposes of finishing and strengthening at the same time, which can not be done by grinding.

Answers to some questions about hoister hydraulic cylinder:

Can the hydraulic oil in the cylinder return to the tank?
Yes, there is a way, for example, first remove the cylinder from the machine, and then connect the two pipes on the cylinder, so that the cylinder piston rod is completely retracted into the cylinder, at this time, the piston is with the bottom, and the rear chamber is almost no oil, and then screw off the joint at the end of the front chamber by the hydraulic station, and put it in an empty bucket. Finally, insert the gas pipe into the oil port of the rear chamber. Open the air source, and then the rod will run out, and you'll drain the hydraulic oil from the end of the rod, which requires a source of air on site.

How does the cylinder work?
Hydraulic transmission principle: oil as the working medium, through the change of the sealing volume to transfer movement, through the internal pressure of the oil to transfer power. 1. The power part - converts the mechanical energy of the prime mover into the pressure energy of the oil (hydraulic energy). For example: hydraulic pump. 2, the executive part - the hydraulic pump input oil pressure energy into the mechanical energy to drive the working mechanism. For example: hydraulic cylinder, hydraulic motor. 3, the control part - used to control and adjust the oil pressure, flow and flow direction. For example: pressure control valve, flow control valve and direction control valve. 4, the auxiliary part - the first three parts are connected together to form a system, which plays the role of oil storage, filtration, measurement and sealing.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
国产伦精品一区二区三区免费九九蜜AT| 国产狼av| 操嫩逼网站| av 日韩 一区二区 火龙果| 大奶子插逼视频啊啊啊啊啊| 美女搞事情AV网| 黑人大鸡巴在线高清不卡| 欧美美女潮喷| 亚洲午夜剧场香蕉视频| 大香蕉射精| 操AV九色| 美女被抽插视频91| 91偷拍与自偷拍亚洲精品| 操中国美女大黑逼| 美女扒开尿道让男人捅视频| 女同国产一区精品| av亚洲女人被黑人巨大进入 | 东京熟女热| 日本一道一区二区三区视频| 91大神视频一区二区在线| 美女后面被操| 91夫妻性生活| 美女久久久一区二区三区| www.欧美在线.com| 欧美激情中文字幕在线五区六区| 国产ab区| 日韩在线精品视频| 少妇被粗大猛插进进出出| 鸡把插逼| 大鸡巴操逼里好爽视频| 欧美操大逼视频| 丝袜高跟内射口爆吞精在线| 水啪啪视频| 辽宁省| 红桃影视av| 嗯嗯啊嗯啊嗯啊嗯啊嗯嗯啊嗯视频网站| 成人人妻免费| 人妻有码日韩| 中文字幕色老头| 日韩超碰导航| 欧美操大屄|