亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

servo hydraulic cylinder Sold to Vietnam

Release time:2023-11-07 17:47:59 Hits: Current position: Home > News

This article mainly introduces:

Vietnam hydraulic cylinder,servo hydraulic cylinder manufacturer,servo hydraulic cylinder

Vietnam servo hydraulic cylinder

(Vietnam servo hydraulic cylinder,produced by Hengyu Group)

servo hydraulic cylinder are widely used in Vietnam,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed servo hydraulic cylinder for customers from Vietnam.

Introduction to servo hydraulic cylinder:

Do not enter foreign bodies when installing the servo hydraulic cylinder block. The place where the installation operation is carried out, the conditions are not good, and foreign bodies can be entered unconsciously. Therefore, the installation site must be cleaned up around, especially the place where the parts are placed must be cleaned, so that there is no dirt.

In recent years, the processing process of the servo hydraulic cylinder generally adopts the rolling method, which is a pressure finishing processing, which uses the cold plastic characteristics of the metal at room temperature, and uses the rolling tool to exert a certain pressure on the surface of the workpiece, so that the surface metal of the workpiece produces plastic flow, and fills in the low concave trough of the original residue, and the roughness value of the workpiece surface is reduced. Due to the plastic deformation of the rolled surface metal, the surface tissue is cold hardened and the grain is fine, forming a dense fiber, and forming a residual stress layer, and the hardness and strength are increased, thus improving the wear resistance, corrosion resistance and compatibility of the workpiece surface. Rolling is a plastic machining method without cutting.

The servo hydraulic cylinder is not the same as the servo hydraulic cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the servo hydraulic cylinder can not be used as a high-power power component, but the servo hydraulic cylinder can be used as a relatively large power component, or the servo hydraulic cylinder system can be used.

If the servo hydraulic cylinder slips or crawls, please check whether there is astringency inside the servo hydraulic cylinder, because the internal parts of the servo hydraulic cylinder are improperly assembled, the parts are deformed, worn or the shape and position tolerance is excessive, the action resistance is too large, so that the piston speed of the servo hydraulic cylinder changes with the different stroke position, and the slip or crawl occurs. Most of the reasons are due to poor assembly quality of parts, surface scars or sintered iron filings, so that the resistance increases, the speed decreases. For example, the piston is different from the piston rod or the piston rod is bent, the servo hydraulic cylinder or the piston rod is offset from the mounting position of the guide rail, and the sealing ring is too tight or too loose. The solution is to repair or adjust, replace damaged parts and remove iron filings.

Answers to some questions about servo hydraulic cylinder:

What are the functions of hydraulic cylinders?
Hydraulic cylinder is a hydraulic actuator, the specific role depends on the installation occasion and the type of hydraulic cylinder. Hydraulic cylinder is mainly used in machinery, and it is the most important component of construction machinery. It is important core component which mainly provide power for machinery.

Are hydraulic cylinders divided into oil cylinders and water cylinders? What's the difference between the two types?
There are oil cylinders and water cylinders. The two cylinders are used in different environments. Oil cylinders are generally used in places where there is less demand for media, which is our most common hydraulic cylinders. Water cylinders are mainly used for large tonnage presses. Because the equipment is too large, the use of hydraulic oil will cause a relatively large waste. However, water is not pure water, there are oil-in-water emulsion and water-in-oil emulsion. Water has another benefit: it's flame retardant. It is especially suitable for some flammable and explosive occasions. Or with water glycol. The use of pure water is very little, mainly because the seal is not good and easy to rust.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
啊~不要~好大~好爽~视频| 亚洲国产人成自精在线A片| 久久久裸体视频中文字幕| 国产午夜精品一区二区三区喷胶| 自拍视频在线81人妻| 嗯嗯啊疼在线观看视频网站| 精品美女在线拍| 辉南县| 日本熟妇WW色频| 大美女被黑鸡巴操| 营口操逼网| 国外综合精品成人在线| 五十路人妻视频在线| 日本黄视频呗一区二区| 在线观看三级片网站91| 亚洲1区2区3区在线观看| 琪琪视频一区二区| 五一高清性爱| 爱爱欧美久久| 丝袜制服在线影音先锋| 美女日逼真实视频| 88婷婷色色88| 91婷婷激情| 激情九九热超碰| 亚洲国产日韩御姐| AV一二三区在线观看免费不卡| 操极品美女逼| 囤严精品一区| 亚洲aⅴ国产精品| 91无码精品一区二| 欧美肏老屄| 白浆高潮在线视频| 超碰碰九七| 日大骚逼免费视频| 老司机av| 你懂的视频一区二区| 亚洲裸体精品久久| 操弄欧美尿| AV国产精品一区| 高清白人自慰专区| 亚洲AV在线观看一区二区|