亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

swager cylinder Sold to Denmark

Release time:2023-11-12 15:30:00 Hits: Current position: Home > News

This article mainly introduces:

Denmark hydraulic cylinder,swager cylinder manufacturer,swager cylinder

Denmark swager cylinder

(Denmark swager cylinder,produced by Hebei Hengyu company)

swager cylinder are widely used in Denmark,because of no transmission clearance,powerful torque,clever hydraulic energy conversion.So our company has designed swager cylinder for customers from Denmark.

Introduction to swager cylinder:

When the swager cylinder wear is serious, you can try to use an alloy scraper to shave grooves with a depth of more than 1mm on the surface of the slip injury, then clean the grooves with acetone, apply the adjusted TS311 anti-wear repair agent on the polished surface with the swager cylinder inner diameter copying plate, and scrape it flat vigorously to ensure compaction and higher than the inner surface of the swager cylinder. After curing, polish to leave a finishing margin. Finally, the overall size, shape tolerance and roughness of the swager cylinder can meet the requirements by grinding. However, the life and reliability of this repair swager cylinder are not high.

The meaning of the swager cylinder model marked by the swager cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the swager cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the swager cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

The swager cylinder is mainly composed of body, piston, piston rod, swager cylinder head, swager cylinder bottom, piston rod head and related auxiliary devices. The piston divides the swager cylinder into two chambers, and moves reciprocally in the swager cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the swager cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the swager cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the swager cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the swager cylinder bottom and the swager cylinder head is serious, so the buffer deceleration should be set at both ends of the swager cylinder The working medium of the swager cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; swager cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the swager cylinder: The buffer structure of the swager cylinder is to prevent the piston from colliding with the swager cylinder head at the end of the stroke.

The "O" ring can be used as an auxiliary seal inside the swager cylinder, and the elastic force of the "O" ring makes the sealing slip ring close to the sealing surface, generating sealing pressure to achieve sealing. When the internal hydraulic pressure increases, the "O" ring will further deform and squeeze the slip ring, thereby increasing the sealing pressure and improving the sealing performance. The structure has the characteristics of low friction coefficient, good wear resistance, automatic compensation for wear and absorption of hard particles in the swager cylinder, and can be completely sealed.

Answers to some questions about swager cylinder:

What is hydraulic cylinder guide?
The cylinder itself can not move, the piston moves, the guide should be used to guide the mechanism connected with the piston extension end. For example, in the commonly used hydraulic press, the guide column above is used to guide the pressure plate connected with the piston.

How to calculate cylinder pressure?
Hydraulic pressure area of cylinder × hydraulic pressure = output force of cylinder 200mm=20cm 100mm=10cm 15Mpa=150Kg/cm2 Cylinder thrust: 3.14×10×10 area ×150 pressure =47100Kg=47.1t cylinder pulling force: 3.14×(10×10-5×5) Area ×150 pressure =35325Kg=35.325t The above calculation did not consider the resistance of oil return, because you did not provide oil return pressure. But the impact should be small.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
下美国操大逼毛片| 麻逼美女| 亚洲一区二区A V| 中文字幕高清超碰| 看看黑大吊天天内射美女在线视频| 在线观看AV二区三区| 国产鲁一区二区| 激情久久av一区av二区| 欧美一区又大又粗| 怡红院视频一区二区| 亚洲一级av一区| 从后面操美女视频| 操骚逼啊臭逼逼啊啊视频免费看| 少妇夜晚福利| 国产传媒剧情高清在线| 大鸡巴操烧逼福利社| 屏山县| 成人无码逼逼| 日韩 不卡 在线| 成人人妻免费| 18一区区| 色诱黄片国产| 手机中文字幕丝袜美腿在线第一区二区 | 男女18禁| 一区无码久久久| 中文字幕一区二区A片 | 嗯嗯嗯啊啊啊啊好爽视频| 综合激情五月天婷婷| 亚洲啊v男人天堂| 黄片靠逼视频免费| 欧美福利社| 日b视频观看| 蔡司无码av一区| 桃园市| 自抠流白浆视频| 美女裸身18禁网站| 中文字幕人妻看见| 天天狠天天干天天透天天伊人| 熟妇与大鸡巴| 国产操我比吧视频| 国产日韩欧美成人视频|