亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tailboard balance cylinder Sold to Kuwait

Release time:2023-11-10 08:35:31 Hits: Current position: Home > News

This article mainly introduces:

Kuwait hydraulic cylinder,tailboard balance cylinder manufacturer,tailboard balance cylinder

Kuwait tailboard balance cylinder

(Kuwait tailboard balance cylinder,produced by Hebei Hengyu company)

tailboard balance cylinder are widely used in Kuwait,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed tailboard balance cylinder for customers from Kuwait.

Introduction to tailboard balance cylinder:

The tailboard balance cylinder is not the same as the tailboard balance cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the tailboard balance cylinder can not be used as a high-power power component, but the tailboard balance cylinder can be used as a relatively large power component, or the tailboard balance cylinder system can be used.

After chrome plating of the piston rod of the tailboard balance cylinder, the surface flatness is not fully treated: After chrome plating of the piston rod surface, the method of post-plating polishing should be changed to post-plating polishing. Although it is necessary to increase the thickness of the coating before grinding (generally increased by about 0.02 in the diameter direction), it can remove chrome plating defects well, and test the binding force of the coating. In addition, due to the micro-roughness of the grinding surface, the trough can store lubricating oil, which can improve the wear resistance and extend the service life.

The repair method of the tailboard balance cylinder: the repair of the tailboard balance cylinder must use brush plating. This is because this repair method can be carried out on site, and the repair effect is good. In this way, loading and transportation can be eliminated to shorten the repair time and improve work efficiency. In addition, the coating obtained by brush plating has good binding force and will not have obvious boundaries. Moreover, the repair surface has high hardness and good wear resistance.

When the hydraulic oil is not pumped into the tailboard balance cylinder, it is necessary to check whether the tubing, oil circuit, especially the hose joint has been blocked, and the relevant oil circuit from the tailboard balance cylinder to the pump should be checked in turn and blocked; Check whether the seal between the taper valve and the seat of the relief valve is good; Check whether the solenoid valve spring is damaged or whether the solenoid coil is burned out; Whether the oil circuit is switched is insensitive.

Answers to some questions about tailboard balance cylinder:

How to calculate the tonnage of the hydraulic press? Example: The input cylinder pressure is 5Mpa, the end area of the cylinder piston is 100mm, and how much is the thrust tonnage?
F=P*S=5*10^6*3.14*(1/20)^2=39250N.

What are the differences between hydraulic cylinder and pneumatic cylinder, what are their advantages and disadvantages?
Hydraulic Cylinder: small body and large force, constant speed and variable speed (easy to change), the adjustment of output is also convenient, and the degree of freedom of transmission is high. However, maintenance costs and installation costs are high, and there is the trouble of mild oil pollution. Pneumatic Cylinder: easy to control, low price, easy access to energy. But the force is small, and can not achieve the effect of stable speed. The gas-liquid pressurized cylinder has the advantages of both of the above: environmental protection and energy saving, easy control, and simple adjustment. However, the output of the trip has certain restrictions, so it is more suitable for short trips, large output, but also environmental protection and energy saving and low configuration of the occasion. Because the pressure used in the pneumatic system is generally in the range of 0.2-1.0Mpa, the cylinder is not suitable for high power component.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
日本在线不卡一区二区三区第一页| 白虎美女日屄抠屄淫叫视频免费在线观看| 亚洲精品美女久久久| 日韩香蕉91在线| 有码一区视频| 看操小嫩逼视频| 国产精品亚洲欧洲精品| 亚洲精品日韩国产一二三区| 亚洲情侣一区二区| 婷婷99精品| 国产亚洲99精品熟女| 动漫操骚视频在线免费播放| 国内自拍偷拍三级片| 美女逼毛免费视频| 操逼视.com| 平乡县| 色五月综合综合| 老女人精品b在线观看| 日本小穴高清视频免费看| 嗯嗯啊好湿在线播放| 韩国成人情生活视频网| 微拍福利视频一区| 在线视频你懂日韩| 亚洲AV调教捆绑一区二区三区| 99热国内自拍| 日本综合一区二区三区婷婷人妻| 黄片网站大全免费| 男女操b视频视频| 美女被大鸡巴操爆| 国产三级视| 麻豆插屄AV| 美女操B视频无遮挡| 老熟妇人一区| 日韩人妻熟妇一区二区| 麻豆国产天美传媒在线看| 洛南县| 大鸡吧一级视频| 麻豆国产AV| 丰满人妻一区二区三区46| 国产骚逼啊| 久久亚洲激情四区|