亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

reciprocating cylinder Sold to Bahrain

Release time:2023-12-18 10:57:25 Hits: Current position: Home > News

This article mainly introduces:

Bahrain hydraulic cylinder,reciprocating cylinder manufacturer,reciprocating cylinder

Bahrain reciprocating cylinder

(Bahrain reciprocating cylinder,produced by Hengyu Group)

reciprocating cylinder are widely used in Bahrain,because of excellent temperature resistance,no transmission clearance,powerful torque.So our company has designed reciprocating cylinder for customers from Bahrain.

Introduction to reciprocating cylinder:

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

When the reciprocating cylinder is in use, measures should be added to prevent the intrusion of pollutants. Effective measures should be taken to control the intrusion of pollutants, such as installing high-efficiency air filters in the tank breathing holes, new oil must be filtered, etc., but also must improve the anti-pollution ability of the reciprocating cylinder itself. In the seriously polluted environment, it is more important to pay attention to, such as the underground oil reciprocating cylinder should use fluorine rubber (FRM) and nitrile rubber (NBR) dust ring, and the ground mechanical reciprocating cylinder should use nitrile rubber dust ring; The filter device is added to the oil inlet of the reciprocating cylinder of the dump truck, construction machinery, work platform and other equipment, and in order to reduce the oil inlet resistance, the flow area should be increased as much as possible, which can effectively reduce the particle pollution from the system.

Before purchasing the reciprocating cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

In order to ensure the service life of the reciprocating cylinder, the hydraulic system must be set up effective filtration to prevent pollution, the cleanliness of the oil should meet the ISO4406 standard, and the quality of the filtration should also meet the corresponding standards in ISO. The grade requirements of the filter are performed according to the actual working conditions of the system, but the minimum requirements are not less than 19/15 in ISO4406, that is, 24μ (β10≥75) in ISO4572.

Answers to some questions about reciprocating cylinder:

To achieve the same stroke, which is better, hydraulic cylinder or lead screw?
If there is batch action, then the hydraulic pressure is better. Hydraulic: smooth operation, no lubrication, easy control, high control accuracy (can use proportional or servo system), the key is to manually control, but certainly to support the hydraulic system, for a single action must cost. Maintenance costs are also high. Lead screw: simple structure, easy to achieve, convenient maintenance, but must be lubricated, can not be manual, or manual control is inconvenient. See where it is used, if it is used in high-precision occasions, it must only be hydraulic, because the lead screw has a gap. There are many hydraulic actions, the hydraulic system itself must be prepared, then the use of hydraulic pressure is also very economical.

Why is a light cylinder less productive than a heavy cylinder at the same oil pressure?
f=ps Under the same pressure, the larger the area, the greater the output, but the maximum pressure can not exceed the system engineering pressure of the cylinder!

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
强势av骚| 噜噜老司机在线| 超碰在线日屄观看| www.18禁果| 免费看一级大鸡巴日韩| 男女激情在线观看91porn| 丰满大乳人妻中文字幕一三区| 嗯嗯啊啊鹅嗯视频| 老司机AV一二三区| 丰满人妻被义子侵犯中文字幕| 自慰国产一区二区| 操操亚州的大黑肥水逼逼| 国产亚洲男女操逼AV| 国产深喉av| baoyu118成人永久免费视频| 激情一区最新吃瓜| 亚洲女艹鸡巴| 香蕉久久久国产黄视频| 媚药无码在线| 超碰在线激情网| 日韩黑人| 大鸡巴插入大胸美女| 中文人妻制服丝袜91| 台当局威胁欧阳娜娜等20多名艺人| 色天堂黄色片天堂一区| 丰满人妻一区二区三区视频53| 熟妇一区二区三区蜜臀| 日本激情成人草草草| 日高潮喷水久久| 丝袜操逼一区二区| 国产精品日韩极品欧美激情| 亚洲熟女1区2区| 百度日韩手机专区在线观看| 老妇熟悉女一区二区三区| 东南亚美女操B| 熟女一区二区三区综合| 国产女优激情在线免费观看| 五月桃花网激情网| 国产成人偷拍一区| 蜜乳高清在线一区二区| 91精品国产A∨无码一区二区|