亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

electric forklift hydraulic cylinder Sold to Jordan

Release time:2023-12-03 16:46:43 Hits: Current position: Home > News

This article mainly introduces:

Jordan hydraulic cylinder,electric forklift hydraulic cylinder manufacturer,electric forklift hydraulic cylinder

Jordan electric forklift hydraulic cylinder

(Jordan electric forklift hydraulic cylinder,produced by Hengyu Group)

electric forklift hydraulic cylinder are widely used in Jordan,because of simple structure and reliable operation,excellent temperature resistance,no transmission clearance.So our company has designed electric forklift hydraulic cylinder for customers from Jordan.

Introduction to electric forklift hydraulic cylinder:

When the piston speed of the electric forklift hydraulic cylinder is high, the steel ball of the check valve flows with the oil flow, so that the valve hole is blocked, and the electric forklift hydraulic cylinder moves irregularly. Elimination method: Replace the steel ball with a cone valve or spool with a guide shoulder.

Under normal circumstances, the electric forklift hydraulic cylinder is composed of the rear end cover, body, piston, piston rod and front end cover and other main parts. In order to prevent the working medium from leaking out of the electric forklift hydraulic cylinder or from the high pressure chamber to the low pressure chamber, a sealing device (sealing ring) is arranged between the electric forklift hydraulic cylinder and the end cover, the piston and the piston rod, the piston and the electric forklift hydraulic cylinder, the piston rod and the front end cover. A dustproof device is also provided on the outside of the front end cover. In order to prevent the piston from impacting the end cap when it moves rapidly to the end of the stroke, the end of the electric forklift hydraulic cylinder can also be provided with a buffer device. If necessary, the exhaust device should be set in order to exhaust.

If the piston rod and electric forklift hydraulic cylinder are stuck or the electric forklift hydraulic cylinder is blocked, at this time, no matter how to operate, the electric forklift hydraulic cylinder does not move or has little action. At this time, check whether the piston and piston rod seal is too tight, whether it enters the dirt and gum deposits: whether the shaft line of the piston rod and the electric forklift hydraulic cylinder is in the center, whether the wearing parts and seals are invalid, and whether the load is too large.

electric forklift hydraulic cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

Answers to some questions about electric forklift hydraulic cylinder:

Is there a way to make the cylinder stop pushing when it hits something hard during the process of pushing?
The simplest solution is to press the stop switch, this switch has a mechanical type, touch the object on the action or send a stop signal, through the operation of the motor control cylinder; There is also an induction switch, that is, when the hydraulic cylinder expands to the range of the induction switch can sense the signal, it sends a signal to let the motor act, resulting in the corresponding action of the cylinder.

What are the causes of hydraulic cylinder oil leakage?
First, between the piston rod and the guide sleeve: 1, the cylinder force is not good, there is a radial force between the piston rod and the guide sleeve there is a partial load, so that the oil seal is worn early, causing oil leakage. 2. The ambient temperature of the piston rod is high, especially radiant heat, and the oil seal aging is fast. 3. Whether the oil seal is selected correctly; Check whether the oil seal is damaged during installation. 4, guide sleeve and piston rod matching tolerance is correct. Second, between guide sleeve and cylinder: 1. Whether the O-ring on the guide sleeve is installed correctly, pay special attention to the O-ring can not "roll", especially some O-rings are die-pressed with a die-closing line. Third, common problems: 1, guide sleeve, cylinder, piston rod concentricity is poor. Fit tolerance is correct.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
狂操美女小逼视频| 九九五月婷狠狠操| 嗯嗯啊啊啊国产在| 亚洲熟女久久久久久| 五月婷婷 91视频| 搞丝袜你懂的| 女人被操在线| 鲍鱼污污在线观看| 亚洲AV综合第一页| 大鸡巴日屁| 国产 激情 在久久| 国产操操操操操操| 熟女操逼麻豆视频网| 无码AV操b| 国内大骚逼av| 操死我一区二区| 九九久久精品一区二区三区四区| 亚洲区 欧美区 有声小说| 啊啊啊使劲操国产| 骚逼被前后操| 操B明星美女| 欧美182福利| 日本草草视频| 这里只有精品自拍偷拍亚洲色图| 少妇官网视频| 97色在色在线观看| 被大几吧插视频| 超碰日本专区| 色呦呦二区| 亚洲中文字幕一区精品自拍| 一区二区三区人妻变态av| 黄色电影之青青草视频| 视频鸡巴大| 班玛县| 婷婷伊人五月天| 在线播放网站欧美| 日本美女一区一区三区| 免费不卡黄片| 插插插白虎| 操美女的逼bbb| 超清无码一区二区91久久|