亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tailboard balance cylinder Sold to Korea

Release time:2023-11-26 09:49:31 Hits: Current position: Home > News

This article mainly introduces:

Korea hydraulic cylinder,tailboard balance cylinder manufacturer,tailboard balance cylinder

Korea tailboard balance cylinder

(Korea tailboard balance cylinder,produced by Hengyu Hydraulic Cylinder Factory)

tailboard balance cylinder are widely used in Korea,because of smooth movement,high work efficiency,excellent fatigue and impact resistance.So our company has designed tailboard balance cylinder for customers from Korea.

Introduction to tailboard balance cylinder:

The commonly used buffer structure of the tailboard balance cylinder is composed of a piston boss and a tailboard balance cylinder head groove. When the piston moves close to the tailboard balance cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

tailboard balance cylinder use should try to avoid sealing belt into the tailboard balance cylinder. As a simple sealing material, polytetrafluoroethylene plastic sealing tape is often used in installation and inspection, and if the winding method of the linear and ribbon-shaped sealing material is wrong, the sealing tape will be cut off and enter the tailboard balance cylinder. The wire belt seal will not have any effect on the winding of the sliding part, but it will cause the check valve of the tailboard balance cylinder to fail to operate or the buffer regulating valve can not be adjusted to the end. For the circuit, it may cause the action of the reversing valve, the relief valve and the reducing valve to fail.

The tailboard balance cylinder should be avoided for a long time without use, if it is indeed idle for a long time for some reason, it should also be regularly turned on for empty operation, so that its parts can be fully lubricated, so as to avoid rust on the working surface and affect the normal work in the future. (If it cannot be turned on and run, a small amount of lubricating oil can be applied on its outer surface for protection) ' The use of the tailboard balance cylinder should pay attention to: the operation should be as far away from the tailboard balance cylinder as possible, to avoid falling objects, knocking, rubbing the tailboard balance cylinder coating. When cleaning the tailboard balance cylinder, only use soft materials (such as cotton) to wipe, and do not scratch high-hardness materials. Do not use the tailboard balance cylinder when the oil temperature exceeds 70 ° C.

The internal leakage of the tailboard balance cylinder is an important indicator to measure the quality of the tailboard balance cylinder: the internal leakage of the tailboard balance cylinder will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the tailboard balance cylinder, so that the tailboard balance cylinder can not accurately and stably stop in a certain position of the tailboard balance cylinder, so it is one of the main indicators of the tailboard balance cylinder.

Answers to some questions about tailboard balance cylinder:

Why does the hydraulic cylinder not return?
For a spring return cylinder, it is possible that 1, the spring is damaged. You can check it for processing. 2, the oil in the oil path is not unloaded, causing it to be unable to reset. 3, the cylinder piston is dead, resulting in no position. For double-acting cylinders, it is possible to: 1, the spool is not reversed, or is not changed to the correct position, check whether the reversing valve is normal (and whether there is electricity). 2, the cylinder piston is dead, resulting in no position, check and treatment can be. 3, the return oil pressure is insufficient, the inlet oil is not unloaded, the operation is not smooth. For reference only.

Does the abbreviation bc stand for bucket cylinder or boom cylinder?
Hydraulic excavator hydraulic cylinder includes boom cylinder, bucket rod cylinder and bucket cylinder three parts, four cylinders. Because of the different naming conventions of major manufacturers, the meaning of BC is also different, for the sake of insurance, you need to consult the manufacturer.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
大几巴扞小b| Av操白虎逼| 欧洲人体视频一区二区三区| 啊啊啊我插死你视频| 蜜臀精品无码一区二区三区口交蜜臀| 韩國女主播精品一區二區| 亚洲国产精品大奶爆操| 跟大鸡吧操逼| 亚洲精品中文字幕一二三四| 中文字幕国产操逼| 骚逼性天堂| 欧美黑人插入亚洲女人| 五月亭亭综合色啪| 台当局威胁欧阳娜娜等20多名艺人| 中文墓区二区三区四区视频| 做暧暧欧美日韩| 无码肛交视频一区| 超碰资源在线观看免费观看 搜索| 18禁蜜桃91| 大香蕉 超碰 综合 97| 黑丝国产精品女同性恋| 成人免看一级av| 婷久在线视频| 久久日韩5| 天天日 av 天天操| 精品丝袜一区二区三区| 中文字幕在线一区二区三区欧美| 亂伦wwwhd老女人一区二区| 想操逼视频| 久播毛片一区二区| 操小骚逼三级国产片| 性爱欧美第十页粗暴| 自拍偷拍 人妻激情| 骚逼视频图片| 资源网站 蜜臀在线| 美女视频深夜福利| www.骚女熟妇.com| 美女白虎操逼网站国产| 欧美老熟女一区二区TV| 亚洲日韩caob| 国产深喉视频口交|