亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

flying wing compartment hydraulic cylinder Sold to Dominica

Release time:2023-11-23 08:22:45 Hits: Current position: Home > News

This article mainly introduces:

Dominica hydraulic cylinder,flying wing compartment hydraulic cylinder manufacturer,flying wing compartment hydraulic cylinder

Dominica flying wing compartment hydraulic cylinder

(Dominica flying wing compartment hydraulic cylinder,produced by Hebei Hengyu company)

flying wing compartment hydraulic cylinder are widely used in Dominica,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed flying wing compartment hydraulic cylinder for customers from Dominica.

Introduction to flying wing compartment hydraulic cylinder:

The pressure of the sliding surface of the flying wing compartment hydraulic cylinder piston is too large, resulting in sintering. The piston tilts due to the weight of the piston rod, resulting in the phenomenon of non-stiffness, or the pressure of the sliding surface of the piston rises due to the action of the transverse load, which will cause sintering. In the design of the flying wing compartment hydraulic cylinder must study its working conditions, the length of the piston and bushing and the size of the clearance must be fully paid attention to.

When the flying wing compartment hydraulic cylinder is kept, do not pay attention to keeping the oil port open, which will produce the condition of accepting foreign bodies at all times, which is absolutely not allowed. Storage must be filled with anti-rust oil or working oil, and plug.

The machining accuracy of the flying wing compartment hydraulic cylinder depends on the level of equipment, production technology and testing means. flying wing compartment hydraulic cylinder processing methods are commonly used in two ways, one is rough boring - fine boring - rolling, generally with 45# seamless steel pipe, this method of processing quality is good, but the cost is high. Another method is to use 20# cold-drawn seamless steel pipe, and then honing, the cost is lower. The piston rod must be adjusted and straightened before processing, and the coating thickness of the piston rod is generally not less than 0.03mm. The piston must be machined in strict accordance with the groove size and tolerance requirements given in the seal manual.

The quality of the flying wing compartment hydraulic cylinder can not be ignored in the purchase of the flying wing compartment hydraulic cylinder. The flying wing compartment hydraulic cylinder is the main component of the flying wing compartment hydraulic cylinder, the single pillar for mining, the hydraulic support, the gun tube and other products, and its processing quality directly affects the life and reliability of the entire product. flying wing compartment hydraulic cylinder processing requirements are high, its internal surface roughness requirements are Ra0.4 ~ 0.8μm, the coaxiality, wear resistance requirements are strict. The basic feature of flying wing compartment hydraulic cylinder is deep hole processing, which has always troubled the processing personnel.

Answers to some questions about flying wing compartment hydraulic cylinder:

What are the main dimensions of the cylinder?
The main dimensions of the cylinder include: cylinder inner diameter, piston cylinder diameter, cylinder length, cylinder wall thickness, stroke, installation distance, etc.

How to achieve hydraulic cylinder self-locking?
Hydraulic cylinder self-locking is divided into oil self-locking and mechanical self-locking. The oil self-locking is equipped with a valve to maintain pressure, so that the hydraulic oil of the cylinder does not return to the tank, and the oil chamber of the cylinder is filled with a certain pressure of oil. However, this pressure holding self-locking is not very safe and reliable, and the plunger will slowly return if there is a leak. Mechanical self-locking is to install a nut on the plunger of the cylinder, and when the cylinder rises to the required position, the nut on the cylinder plunger is rotated to the end, and the cylinder block is in contact, so that the plunger will be fixed to the required height. When it is necessary to relieve the pressure, screw the nut on again and let the plunger return to the position. This kind of cylinder has a special name, called self-locking hydraulic cylinder.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
欧美乱妇日本无乱码| 美腿丝袜中文字幕精品网址| 九九热免费网站蜜桃| 爱爱嫩av| 日本熟女内射| 人妻蜜与肉一区二区三区| 啊啊……嗯嗯……视频| 人人操天天操天天干| 日本二三区中文高清视频| 性福福利欧美| 天堂网 人人爽 五月| 岛国AV综合| 午夜婷婷九色| 舔吃骚逼视频网站视频| 熟女视频免费一区二区| 校园春色自拍偷拍欧美色图| 超碰 国产 口爆| 想看亚洲操逼的| 中出老熟妇| 欧美AA级性生活| 亚洲操b网在线| 国产一区二区视频91| 肏国产尤物在线| 淫荡大鸡巴Av| 亚洲熟女少妇 在线视频| 内射内射啪啪啪黑丝美女| 大鸡吧疯狂暴力操B| 阜宁县| 操美女的逼91| 美女高潮喷水欧美| 丁香婷婷中文字幕| 色综合一区在线| 日韩欧美美女视频| 亚洲中文字幕涩涩| 中文字幕亚洲bt日韩bf欧美bt| 日本有码 在线播放| 黄色三级视频一区二区三区| 男操女逼欧美日本| 视频一区在线观看中文字幕视频| 欧美一二三区狗狗| 一区二区在线伦理|