亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

steering cylinder Sold to America

Release time:2023-11-20 09:49:10 Hits: Current position: Home > News

This article mainly introduces:

America hydraulic cylinder,steering cylinder manufacturer,steering cylinder

America steering cylinder

(America steering cylinder,produced by Hebei Hengyu company)

steering cylinder are widely used in America,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed steering cylinder for customers from America.

Introduction to steering cylinder:

The steering cylinder is not the same as the steering cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the steering cylinder can not be used as a high-power power component, but the steering cylinder can be used as a relatively large power component, or the steering cylinder system can be used.

The steering cylinder body is commonly made of No. 20, 35, 45 seamless steel pipe, and the steel pipe is honed or rolled to achieve the roughness requirement within 0.4μm. The low pressure steering cylinder can use 20 steel pipe, and the high pressure steering cylinder can use 45 steel pipe.

The difference between the plunger steering cylinder and the piston steering cylinder is that the piston in the steering cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type steering cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

When producing oil steering cylinders, there are two processing processes, grinding and rolling, the latter is better than the former. Rolling machining is a kind of non-cutting machining, using the plastic deformation of the metal at room temperature, so that the micro roughness of the workpiece surface is flattened to achieve the purpose of changing the surface structure, mechanical characteristics, shape and size. Therefore, this method can achieve the two purposes of finishing and strengthening at the same time, which can not be done by grinding.

Answers to some questions about steering cylinder:

What is the meaning of cylinder ejection on the injection mold, and what is the difference between cylinder ejection and ordinary ejection?
Usually requires the front die ejection will use the cylinder to drive the thimble plate to achieve the ejection of the thimble. There is also a case that the mold is very large or long, and the balance of the ejector rod of the injection molding machine is not enough, and the cylinder ejector will also be used.

How to remove the lifting cylinder from the forklift truck?
The lifting cylinder is generally fixed on the door frame, and there are screws under and above it, and it is OK to loosen the screws with a wrench on the top. However, we must pay attention to ensure safety and prevent damage to the cylinder or safety accidents.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
亚洲有码种子中文字幕在线播放| 啊啊啊啊快操视频| 大鸡吧小穴视频| 中文字幕久久一区| 骚逼湿了 视频| 操骚逼啊臭逼逼啊啊视频免费看| 日韩欧美中文久久| 亚洲视频啪啪| 少妇是骚穴淫比| 国产高清无码肛交| 91操草操Bbcn| 一级黄片果冻传媒捉奸在床板| 成人大目巴日美女| AV综合入口| 国产淫妇重口另类直播在线| 欧美老熟妇视频一区二区在线| 女骚货性天堂| 日本在线视频大香蕉| 1000-人妻斩-H0930五十路| 打鸡吧操大逼| 日韩欧美亚洲黄片| 女人让男人捅| 中美日韩老熟女色不戴套| 特黄特色一区二区| 开心成人网激情| 欧洲精品久久| 大鸡巴大奶子操逼视频| 少妇制服一区| 淫乱人妻精品一区二区| 欧美久久精品一区二区白虎| 一呦二呦国产精品| 婷婷五月日本成人电影在线观看 | 黄色一级干带干的一级| 天天r夜夜cao| 美女狠插入| 日本女优在线视频1区2区中文字幕蜜| 黑丝美女被男人捅| 抽插娇嫩视频| 精品一区二区欧美福利| 香蕉日韩| 日本熟妇被操免费网站|