亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

hoister hydraulic cylinder Sold to Britain

Release time:2023-11-08 08:12:05 Hits: Current position: Home > News

This article mainly introduces:

Britain hydraulic cylinder,hoister hydraulic cylinder manufacturer,hoister hydraulic cylinder

Britain hoister hydraulic cylinder

(Britain hoister hydraulic cylinder,produced by Hengyu Group)

hoister hydraulic cylinder are widely used in Britain,because of simple structure and reliable operation,no transmission clearance,excellent temperature resistance.So our company has designed hoister hydraulic cylinder for customers from Britain.

Introduction to hoister hydraulic cylinder:

When the hoister hydraulic cylinder is installed on the main engine, the oil port piping part and the guide sleeve should be checked for oil leakage in the running test, and the earring and the middle hinge shaft bearing should be refueled.

hoister hydraulic cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

The pressure of the sliding surface of the hoister hydraulic cylinder piston is too large, resulting in sintering. The piston tilts due to the weight of the piston rod, resulting in the phenomenon of non-stiffness, or the pressure of the sliding surface of the piston rises due to the action of the transverse load, which will cause sintering. In the design of the hoister hydraulic cylinder must study its working conditions, the length of the piston and bushing and the size of the clearance must be fully paid attention to.

Before the hoister hydraulic cylinder is removed, the relief valve should be loosened to reduce the pressure of the hydraulic circuit to zero, and then the power supply should be cut off to stop the hydraulic device. After loosening the oil port piping, the oil plug should be applied to plug the oil port.

Answers to some questions about hoister hydraulic cylinder:

What are the main dimensions of the cylinder?
The main dimensions of the cylinder include: cylinder inner diameter, piston cylinder diameter, cylinder length, cylinder wall thickness, stroke, installation distance, etc.

What is the meaning of cylinder HSGK01-100/70E-4111-1320?
hsg Double acting single piston rod hydraulic cylinder and front end cover are connected by internal clamp key 01 Design serial number 100 cylinder inner diameter 70 piston rod outer diameter e Pressure class code 16mpa4111 Front flange, rod end external thread, both ends with buffer, oil port connection is internal thread 1320 stroke.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
大粗几把久久久久久久久久| 中文字幕日本有码在线| 日韩精品国产一区二| 美女让男生桶18禁| 久久久91精品蜜臀| 大香蕉在日本视频网| 黑鸡巴性XX能播放视频| 十八进无遮挡免费网址| mm 啪啪视频| 人人舔天天操| 操比网日本在线怡红院 | 性骚逼视频| 中文字幕AV一区二区三区四色| 来操我的小骚逼| www.hbchengte.com| 超碰公开在线97| 性爱色吧91在线| kaobi视频| 操美女肉穴| 日屁眼视频在钱| 美女野外操逼视频| 深爱伍月综合| 黄色一级大片免费版| 操老女人的逼逼视频| 大鸡巴把妹子捣出白浆在线观看 | 操鸡吧小逼逼| 免费看欧美美女被操| 操一操免费福利视频| 白嫩白虎被操| 国产一级黄色粗大鸡扒操大逼| 91人人妻人人操| 亚州另类网站| www.日本av一区二区| 色av另类黄片| 亚洲美女操鸡巴| 草逼逼的视频| 额敏县| AV在线免费观看一区二区三区| 熟妇XX 黄污涩一区| 美日韩考逼视频一区| 伊人操逼a v|