亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

trunnion cylinder Sold to France

Release time:2023-11-08 08:11:50 Hits: Current position: Home > News

This article mainly introduces:

France hydraulic cylinder,trunnion cylinder manufacturer,trunnion cylinder

France trunnion cylinder

(France trunnion cylinder,produced by Hengyu Group)

trunnion cylinder are widely used in France,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed trunnion cylinder for customers from France.

Introduction to trunnion cylinder:

The coordination of the sliding parts of the trunnion cylinder itself should not be too tight, the sealing friction force should not be too large, and H8 / f8 coordination should be selected between the piston rod and the guide sleeve; Check whether the size of the sealing ring is processed strictly according to the standard; If the V-shaped sealing ring is used, the sealing friction should be adjusted to a moderate degree.

The trunnion cylinder is not the same as the trunnion cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the trunnion cylinder can not be used as a high-power power component, but the trunnion cylinder can be used as a relatively large power component, or the trunnion cylinder system can be used.

The repair method of trunnion cylinder wear: 1. Metal repair material is applied to the scratched surface; The first layer should be thin, uniform and fully covered with the scratched surface to ensure the best adhesion between the material and the metal surface, and then apply the material to the entire repair site and press repeatedly to ensure that the material is filled and reaches the required thickness, so that it is slightly higher than the surface of the guide rail; 2, the material at 24℃ to fully achieve the performance of 24 hours, in order to save time, can be through the tungsten halogen lamp to increase the temperature, the temperature rises 11℃, the curing time will be reduced by half, the best curing temperature 70℃; 3. After the material is cured, use a fine grinding stone or a scraper to repair and smooth the material higher than the surface of the guide rail, and the construction is completed.

In recent years, the processing process of the trunnion cylinder generally adopts the rolling method, which is a pressure finishing processing, which uses the cold plastic characteristics of the metal at room temperature, and uses the rolling tool to exert a certain pressure on the surface of the workpiece, so that the surface metal of the workpiece produces plastic flow, and fills in the low concave trough of the original residue, and the roughness value of the workpiece surface is reduced. Due to the plastic deformation of the rolled surface metal, the surface tissue is cold hardened and the grain is fine, forming a dense fiber, and forming a residual stress layer, and the hardness and strength are increased, thus improving the wear resistance, corrosion resistance and compatibility of the workpiece surface. Rolling is a plastic machining method without cutting.

Answers to some questions about trunnion cylinder:

How to control the speed of the cylinder?
High demand control, it is necessary to use servo closed-loop control, you can adjust the speed at will. Reference: Hydrodynamic Motion Control Practical Design Guide.

How does the clamping cylinder work?
Hydraulic transmission principle: oil as the working medium, through the change of the sealing volume to transfer movement, through the internal pressure of the oil to transfer power. 1. The power part - converts the mechanical energy of the prime mover into the pressure energy of the oil (hydraulic energy). For example: hydraulic pump. 2, The executive part - the hydraulic pump input oil pressure energy into the mechanical energy to drive the working mechanism. For example: hydraulic cylinder, hydraulic motor. 3, The control part - used to control and adjust the oil pressure, flow and flow direction. For example: pressure control valve, flow control valve and direction control valve. 4, The auxiliary part - the first three parts are connected together to form a system, which plays the role of oil storage, filtration, measurement and sealing.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
青春草手机在线免费视频| 欧美熟女相奸| 日本熟女伦| 国产无套流白浆视频| 五月婷婷日韩综合激情男人色| 亚洲欧美日韩伦理视频一区| 大鸡巴插av在线观看| 三级不卡午夜激情| 日本在线欧美在线-亚洲日本在线播 | 台湾佬性一级黄片| 韩一区二区电影_久久精品国产| 欧日韩五十路| 成人用 巴插进女孩免费视频| 几把操逼视频啊啊| 五月婷婷综合狠狠| 精品人妻一区二区三区18| 日韩成人做暧暧视频在线观看| 男生桶到爆爽| 午夜操日本女人| 香蕉超碰97| 亚洲色中文字幕| 美女被大鸡巴桶高潮| 欧美黑人大吊操| 日本禁片一区二区| AV片在线男人天堂| 大鸡巴把小穴插的爽在线视频| 美女黑丝操逼网站| 骚逼社区视频免费观看| 美女插逼网| 日b露脸视频| 日本久久一区不卡| 操插人妻av| 大香蕉国产手机在线99| 97超碰国产精品| 爆操白虎骚逼逼| 国产一区拳交中国人| 艹大黑逼WWWWWYY| 黄色电影之青青草视频| 欧美大操逼| 二区小视频二区小视频| 操小逼逼逼逼视频|