亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

cylinder with buffer Sold to Slovenia

Release time:2023-11-15 10:42:03 Hits: Current position: Home > News

This article mainly introduces:

Slovenia hydraulic cylinder,cylinder with buffer manufacturer,cylinder with buffer

Slovenia cylinder with buffer

(Slovenia cylinder with buffer,produced by Hengyu Group)

cylinder with buffer are widely used in Slovenia,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed cylinder with buffer for customers from Slovenia.

Introduction to cylinder with buffer:

The internal leakage of the cylinder with buffer is an important indicator to measure the quality of the cylinder with buffer: the internal leakage of the cylinder with buffer will reduce the volumetric efficiency, increase the temperature rise of the oil, affect the positioning accuracy of the cylinder with buffer, so that the cylinder with buffer can not accurately and stably stop in a certain position of the cylinder with buffer, so it is one of the main indicators of the cylinder with buffer.

Causes and countermeasures of oil cylinder with buffer leakage: Cast iron ring seal allows a certain degree of internal leakage. The impurities in the cylinder with buffer will lead to premature wear of the piston seal, replace the piston seal; If the cylinder with buffer is visibly scarred, the cylinder with buffer must be replaced. It can be pressurized at one end of the cylinder with buffer and opened at the other end of the oil port to observe whether there is obvious internal leakage at the end of the oil port. Most cylinder with buffer piston drift may not come from the cylinder with buffer, the above method to determine the cylinder with buffer without internal leakage is helpful to determine the problem of the hydraulic system related components.

There are some honeycomb holes in the inner wall of the cylinder with buffer, piston or piston rod surface. How is this formed? When we repair the cylinder with buffer, we can see that there are some honeycomb holes on the inner wall of the cylinder with buffer, the piston or the piston rod surface, which are caused by cavitation. Therefore, the cavitation of the cylinder with buffer is targeted to prevent. Is very necessary.

When the cylinder with buffer is installed, the piston and the cylinder with buffer head and other parts have large mass, large size and large inertia, even if there is a lifting equipment auxiliary installation, because the specified clearance is small, no matter how hard it will be put into, therefore, the end of the piston or the cylinder with buffer head boss is easy to cause scars when it hits the inner surface of the cylinder with buffer wall. The solution to this problem: for a large number of small products, the use of autocratic assembly oriented tools during installation; For heavy, thick and large large and medium-sized cylinder with buffers, only careful and careful operation can be avoided.

Answers to some questions about cylinder with buffer:

What is the material of the hydraulic cylinder slider?
Three parts of the hydraulic cylinder are essential, which are: cylinder - cylinder head assembly, piston - piston rod assembly, and sealing device. When you say slider, you mean piston. - Piston rod. Piston materials commonly used gray cast iron, wear-resistant cast iron, aluminum alloy (assembled), etc., can also be used 35 and 45 steel (integral). The piston rod is generally made of 35 and 45 steel. When the impact vibration is large, alloy steel such as 55 steel or 40Cr is used.

Why manual forklift oil cylinder can not lift up?
Manual hydraulic forklift truck often can not be pressed up, there are several reasons: for manual hydraulic truck: 1) There is no hydraulic oil 2) the purity of the oil is not enough 3) the adjusting bolt is too close or the adjusting screw is too tight, so that the valve is always open, 4) there is an air in the hydraulic cylinder. Method: 1) Refueling 2) Oil change 3) air discharge. For manual hydraulic stacker, also called manual lift car 1) Less than the amount of oil 2) impurities in the hydraulic oil, so that the check valve can not be closed. Method 1) Add enough hydraulic oil 2) Remove the cylinder, screw off the bottom plate, remove the impurities in the bottom plate.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
国产深喉在线播放| 操逼在田里| 超碰在线观看中文一区二区三区在线观看| 成人av资源导航| 大鸡巴快进来视频免费看| 鸡巴插入小穴视频观看| 织金县| 色婷婷综合在线观看| 中文字幕有限公司都都都| 人人操天天干超碰在线| 丝袜美女被操视频网站| 啊啊啊啊额嗯嗯嗯啊啊啊嗯嗯嗯在线观看| 大鸡巴正在喷水高潮视频| 松溪县| 嗯啊,大鸡吧插穴在线播放| 欧美大鸡巴久久久久久 | 欧美羞羞羞在线免费观看视频网站| 欧美在线视频香蕉日本| 免费美女日妣视频| 青青操免费国产| 五月亭亭综合色啪| 爱爱日韩亚洲爱爱| 欧美激情自拍视频| 北岛玲一一区二区蜜桃| 大鸡巴美女操| 最爽最乳美女在线| 操烂小骚逼视频网站| 亚洲日韩精品爆乳一区二区三区| 国产精品sao| 大鸡巴操逼好爽啊视频| www.成人一区二区 | 欧美一级日韩三级| 超碰91公开| 中国男女操b| 湘乡市| 久久人妻少妇综合网| 男女狂插视频| 粉红小穴视频| 欧美美女网18| av卡一卡二| 一区二大胆视频|