亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tension cylinder Sold to Azerbaijan

Release time:2023-11-14 08:41:19 Hits: Current position: Home > News

This article mainly introduces:

Azerbaijan hydraulic cylinder,tension cylinder manufacturer,tension cylinder

Azerbaijan tension cylinder

(Azerbaijan tension cylinder,produced by Hengyu Group)

tension cylinder are widely used in Azerbaijan,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed tension cylinder for customers from Azerbaijan.

Introduction to tension cylinder:

Before the tension cylinder is removed, the system should be unloaded, the loop pressure is zero, the oil source should be cut off, and the oil port should be blocked after the oil port distribution pipe is loosened.

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

The pressure of the sliding surface of the tension cylinder piston is too large, resulting in sintering. The piston tilts due to the weight of the piston rod, resulting in the phenomenon of non-stiffness, or the pressure of the sliding surface of the piston rises due to the action of the transverse load, which will cause sintering. In the design of the tension cylinder must study its working conditions, the length of the piston and bushing and the size of the clearance must be fully paid attention to.

In the case of serious wear on the inner surface of the tension cylinder, or when there is a deep longitudinal tensile mark, it should be mapped according to the physical object and re-produced by the professional manufacturer according to the tension cylinder manufacturing process for replacement. The tension cylinder can also be repaired with TS311 antiwear repair agent. TS311 anti-wear repair agent is mainly used for the repair of worn and slipped metal parts.

Answers to some questions about tension cylinder:

What is the difference between gas-hydraulic pressurized cylinder, pneumatic cylinder and oil cylinder?
The cylinder block is small and the force is large, constant speed and variable speed can be used (easy to change), the adjustment of the output is also convenient, and the freedom of transmission is high. However, maintenance costs and installation costs are high, and there is the trouble of mild oil pollution. Easy cylinder control, low price, easy access to energy. But the force is small, and can not achieve the effect of stable speed. The gas-liquid pressurized cylinder has the advantages of both of the above: environmental protection and energy saving, easy control, and simple adjustment. However, the output of the trip has certain restrictions, more suitable for short trips, large output, but also environmental protection and energy saving and low configuration of the occasion.

How does the self-locking cylinder work?
Hydraulic cylinder self-locking is divided into oil self-locking and mechanical self-locking. The oil circuit itself is equipped with a valve to maintain pressure, so that the hydraulic oil of the cylinder does not return to the tank, and the oil chamber of the cylinder is filled with a certain pressure of oil. However, this pressure holding self-locking is not very safe and reliable, and the plunger will slowly return if there is a leak. Mechanical self-locking is to install a nut on the plunger of the cylinder, and when the cylinder rises to the required position, the nut on the cylinder plunger is rotated to the end, and the cylinder block is in contact, so that the plunger will be fixed to the required height. When it is necessary to relieve the pressure, screw the nut on again and let the plunger return to the position. This kind of cylinder has a special name, called self-locking hydraulic cylinder.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
欧美十八岁以上女操BB| 成人日麻B视频| 人体艺术AV在线导航| av精选骚逼| 国产欧美一区二区精品性色91| 欧美美女操逼操的通红| 91精品美女被干| 韩国av大尺度啊啊啊在线观看| 天天射天天操天天插天天日天天干| 操B网免费| 啪啪av一区| 野蛮人永远别指望等到中国电话| 骚逼果冻传媒性视频| 日逼经典视频| 九九五月婷狠狠操| 就要狠狠干综合| .日本电影 五十路人妻 中文字幕| 欧美日韩亚洲国语| 奇米网久久国产情品一区二区| 北岛玲一区无码在线| 激情草草网| 美女插鸡巴黄色免费| 一本有码视频| 白虎抠逼视频| 日韩无码精品视频啪啪啪| 在线男人天av| 亚洲无码裸体一区二区| 人操人 大鸡巴操人| 给我播放一个成人AV| 91久久精品无一区二区三区| 国产美女无遮挡裸体| 爆乳美女操B爽| 91轻轻操逼| 亚洲资源女同片| 骚逼人妻靠逼免费视频| 美女操的好爽| 国产精品视频色欲红桃视频| 欧美不卡视频一区发布| 天天天天操黑人巨屌| 18禁止观看亚洲熟女| 久久久添螺91久久久|