亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

spring return cylinder Sold to Poland

Release time:2023-11-14 08:41:16 Hits:102 Current position: Home > News

This article mainly introduces:

Poland hydraulic cylinder,spring return cylinder manufacturer,spring return cylinder

Poland spring return cylinder

(Poland spring return cylinder,produced by Hebei Hengyu company)

spring return cylinder are widely used in Poland,because of simple structure and reliable operation,excellent temperature resistance,no transmission clearance.So our company has designed spring return cylinder for customers from Poland.

Introduction to spring return cylinder:

spring return cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

spring return cylinder spool stuck or valve hole blocked How to solve: When the flow valve or direction valve spool stuck or valve hole blocked, the spring return cylinder prone to misoperation or action failure. At this time, the contamination of the oil should be checked; Check whether dirt or colloidal deposits are stuck in the spool or blocking the valve hole; Check the wear of the valve body, clean and replace the system filter, clean the fuel tank, and replace the hydraulic medium.

Analysis of commonly used seals: The wear ring and slip ring commonly used on the spring return cylinder are generally made of polytetrafluoroethylene + graphite, because pure polytetrafluoroethylene is easy to produce plastic creep, which is only suitable for low pressure and low wear resistance conditions. If the sealing ring used is a composite material formed after adding graphite filler, the performance can be effectively improved, the ability to resist plastic creep is increased by 2 to 3 times, the initial deformation caused by the load is reduced by 30 to 60% : the rigidity is increased by 2 to 3 times: the dimensional stability under heat is increased by 2 times, and the hardness is increased by l0 to 15%.

spring return cylinder piston rod material introduction: In general, we use 45 steel to produce spring return cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

Answers to some questions about spring return cylinder:

What is the cause of the deep scratch of the cylinder?
The following reasons can cause the cylinder to be scratched. 1: Hydraulic oil containing particulate impurities into the hydraulic cylinder, these particulate impurities stuck between the piston rod and the guide ring (or stuck between the piston and the inner wall of the cylinder), when the piston movement in the cylinder will scratch the piston rod, the phenomenon of the inner wall of the cylinder, the more particles, the larger the scratch marks the deeper and more obvious. 2: The body of the cylinder itself. Due to assembly or design reasons, the coaxial error between the piston rod, piston, cylinder, guide ring and other parts is too large, or the cylinder, piston rod straightness error is too large, so that the piston rod and the guide ring interference between the cylinder, this mechanical interference will certainly lose the piston rod or cylinder wall.

When the superimposed hydraulic control valve is added to the bottom of a solenoid valve and a double directional throttle valve, why does the cylinder shock on the return trip?
The stack hydraulic control check valve must be added above the stack one-way throttle valve.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
丝袜人妻二区| 男女做爱福利视频| 黄色极品视频在线| 正在播放国产AV一区| 人妻35p三区| 欧美在线视频青青草| 日韩美女操比视频| 欧美老妇综合| b 被插三根 3 逼| av色在| 日韩久久性爱| 日本性感大扎美女免费操逼视频| 在线欧美国产日韩| 日本女同久久国产精品视频| 91日韩一区| 亚洲老司机视频在线播放| 亚洲激情小说区| 亚洲二区三区yyy美射| 欧美大几巴操B爽人人爽| 翁牛特旗| 国产日骚妇| 97大香蕉免费看| 北条丝袜导航在线播放| 中文字幕+无码+乱码| 粗大鸡巴久久久久久久久久| 操中国人熟女| 九九玖玖99热| 国产美女逼网站| 美女露大逼91| 18成禁看日本网站黄色| 国产在线观看 AV HD| 丝袜精品二区| 国产AV午夜福利| 有码视频中文字幕免费观看三区| 精品小骚逼| 国产AV大全| av资源草草草草草草| 少妇熟女国产亚洲视频| 草原av| 黑人大鸡巴爆操日本大奶女人骚逼| t偷拍自拍|