亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

sanitation truck hydraulic cylinder Sold to Austria

Release time:2023-11-13 11:19:15 Hits: Current position: Home > News

This article mainly introduces:

Austria hydraulic cylinder,sanitation truck hydraulic cylinder manufacturer,sanitation truck hydraulic cylinder

Austria sanitation truck hydraulic cylinder

(Austria sanitation truck hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory)

sanitation truck hydraulic cylinder are widely used in Austria,because of smooth movement,high work efficiency,excellent fatigue and impact resistance.So our company has designed sanitation truck hydraulic cylinder for customers from Austria.

Introduction to sanitation truck hydraulic cylinder:

How the cavitation of the sanitation truck hydraulic cylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the sanitation truck hydraulic cylinder, resulting in corrosive damage to the parts.

sanitation truck hydraulic cylinder body inspection: The inner surface of the sanitation truck hydraulic cylinder and the piston seal are the main factors causing the leakage in the sanitation truck hydraulic cylinder, if the sanitation truck hydraulic cylinder has a longitudinal tensile mark, even if the new piston seal is replaced, it can not effectively eliminate the fault, the inner surface of the sanitation truck hydraulic cylinder mainly checks whether the dimensional tolerance and shape and position tolerance meet the technical requirements, there is no longitudinal tensile mark, and measures the depth of the longitudinal tensile mark, in order to take the corresponding solution.

How to repair the sanitation truck hydraulic cylinder body when it is damaged: When the sanitation truck hydraulic cylinder has trace deformation and shallow tensile marks, the sanitation truck hydraulic cylinder is repaired by strong honing process. The heavy honing process can repair sanitation truck hydraulic cylinders up to 2.5 times out of tolerance than the original tolerance. It honed the parts with excessive size or shape error through a powerful honing machine, so that the overall size, shape tolerance and roughness of the sanitation truck hydraulic cylinder can meet the technical requirements.

The oil sanitation truck hydraulic cylinder is a part of the hydraulic system, in the hydraulic system, to reasonably design the heat dissipation system, to prevent the oil temperature is too high is the key to keep the hydraulic oil temperature normal. The temperature of the system should be kept in a suitable range to reduce the energy released when the bubble bursts. While not affecting the normal circulation of the coolant, a certain amount of anti-corrosion additives can be appropriately added to inhibit rust. When operating the hydraulic system, we should strive to be stable, not too fast, too strong, and try to reduce the impact of hydraulic oil on hydraulic components.

Answers to some questions about sanitation truck hydraulic cylinder:

What is the difference between hydraulic cylinder self-adjusting buffer and adjustable buffer?
If it is the buffer device inside the cylinder, then there are 4 basic forms, cylindrical buffer device, conical buffer device, variable throttle and adjustable flow groove. The biggest difference between the first three and the latter is that the latter can be adjusted through the external thimble to change the buffer strength, the first three mainly rely on the buffer device and buffer groove form to achieve the buffer (among them, the first type of buffer strength will not change, and the buffer strength of the two and three forms of buffer devices can be gradually increased).

How to deal with the surface degreasing process before spraying paint after cylinder assembly, and what degreasing agent is used?
Cylinder painting, generally using the following process (note: the cylinder is best painted, do not spray powder coating, because the powder coating curing temperature is high, will lead to sealing defects and oil leakage) : Pre-degreasing - degreasing - washing - washing - pickling - washing - washing - table adjustment - phosphating - washing - washing - drying - polishing - spray primer - spray paint degreasing agent generally use neutral or weak alkaline degreasing agent, phosphating liquid generally use zinc phosphating liquid.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
久久熟去干网| 国产精品美女网址| 隆化县| 精品一区二中文| 肥乡县| 青青草黄色电影在线| 男和女一起操B| 欧美日皮大黄片| 操老太太逼逼导航| 精品一区二区AV观看| 成人在线一二三区| 色播操逼女人网| 黑人操逼一区热区| 色诱在线系列| 1769大香蕉首页| 熟女欲色一区二区| 国精品无码一区二区三区在线| 大鸡巴干女| 91精品国产综合久久久久蜜臀的特色| chinese性偷拍大全| 狠狠的干骚货女人视频| 艹逼网站视频嗯啊嗯| 少妇人妻综合久| 日韩AV一区二区三区 爱欲| 国产一级黄色录像| 大鸡巴日屁| www.射伊蕉婷婷| 在线精品小视频| 不卡成人一区| 福利短片视频在线观看大香蕉| 大鸡巴插入小嫩逼视频| 人妻黑丝中文字幕| 亚洲淫人网| 北条一区二区三区视频| 被大鸡巴操的喷水视频| 99r热一区| 一起草欧美国产日韩| 青青操留在线视频| 国区AV.一区二区三区四区| 好吊操好屄| av资源一区二区三区|