亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

baling press cylinder Sold to S.Africa

Release time:2023-11-12 15:33:20 Hits: Current position: Home > News

This article mainly introduces:

S.Africa hydraulic cylinder,baling press cylinder manufacturer,baling press cylinder

S.Africa baling press cylinder

(S.Africa baling press cylinder,produced by Hengyu Hydraulic Co., Ltd)

baling press cylinder are widely used in S.Africa,because of excellent fatigue and impact resistance,no need for deceleration device,long service life.So our company has designed baling press cylinder for customers from S.Africa.

Introduction to baling press cylinder:

Regular maintenance of the baling press cylinder includes: regular tightening, baling press cylinder fastening screws and gland screws, baling press cylinder piston rod stop adjustment screws, should be tightened once a month, tighten each screw evenly, and achieve the corresponding tightening torque. Replace the seal regularly, it is recommended to replace the seal of the baling press cylinder once a year. Clean regularly, the baling press cylinder is cleaned every other year, and the seals are replaced while cleaning.

There are some honeycomb holes in the inner wall of the baling press cylinder, piston or piston rod surface. How is this formed? When we repair the baling press cylinder, we can see that there are some honeycomb holes on the inner wall of the baling press cylinder, the piston or the piston rod surface, which are caused by cavitation. Therefore, the cavitation of the baling press cylinder is targeted to prevent. Is very necessary.

When installing the baling press cylinder, the axial ends of the baling press cylinder cannot be fixed. Due to the effect of liquid pressure and thermal expansion in the baling press cylinder, there is axial expansion. If the two ends of the baling press cylinder are fixed, all parts of the baling press cylinder will be deformed. When disassembling the baling press cylinder, it is strictly forbidden to hammer the baling press cylinder and the piston surface, such as the baling press cylinder hole and the piston surface is damaged, do not allow sandpaper grinding, to use a fine oil stone carefully grinding. The clearance between the guide sleeve and the piston rod should meet the requirements.

baling press cylinder daily maintenance, should focus on checking whether the piston rod surface roughness and shape and position tolerance meet the technical requirements, if the piston rod bending should be calibrated to meet the requirements or according to the physical mapping, manufactured by a professional manufacturer. If the piston rod surface coating wear, slip damage, local spalling can be adopted to remove the coating, re-chrome surface processing process.

Answers to some questions about baling press cylinder:

Why can't the hydraulic cylinder be replaced with water?
Hydraulic oil for hydraulic transmission has a variety of requirements for viscosity, density, flow rate, and temperature, which are not available for water.

How to distinguish the size of hydraulic cylinder cavity?
The hydraulic cylinder has a rod cavity and a rodless cavity. The rod cavity is the cavity that the piston rod extends out. The rod cavity is of course small due to the existence of the piston rod. That's just relative.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
肉棒大鸡吧插进去好爽在线观看| 亚洲精品高清av一区二区| 日韩av另类| 日韩G奶少妇| 毛片女人中国| 3www黑人操亚洲美女com| 被操到喷水的视频| 美人在线二区| 吃大鸡巴视频| 国产乱码精品一区二区三区av| 大逼毛AV| 辽阳熟女的逼| 操美女逼的网| 最新超碰中文字幕av| 国产鸡巴好大好大好大好大视频免费看| 嗯嗯啊好爽在线观看| 久久亚洲丰满人妻| 亚洲资源女同片| 中文字幕青娱乐| 国产黑屌视频网址| 嗯嗯好痒想要视频| 高清无码八区| 大小香蕉亚洲日韩精品| 芜湖市| 国产成人一卡二卡| 小日本操骚逼| 看个大鸡巴操逼东北的中国片| 嗯嗯啊啊一区二区嗯啊| 国产夫妻福利在线| 一区二区三区成人午夜| 日韩国产欧美视频在线观看| 操美女bb各网站视频| 欧美日韩最新另类| 囯产暴菊女在线播放| 亚洲情侣综合在线| 欧美暴操浪荡老女人| 鸡巴插进逼里黄片| 自慰少妇声音| 日本美女被操出水的网站| 中国操逼逼| 湿视频网站|