亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

stacker cylinder Sold to Morocco

Release time:2023-11-12 15:33:15 Hits: Current position: Home > News

This article mainly introduces:

Morocco hydraulic cylinder,stacker cylinder manufacturer,stacker cylinder

Morocco stacker cylinder

(Morocco stacker cylinder,produced by Hengyu Hydraulic Cylinder Factory)

stacker cylinder are widely used in Morocco,because of high work efficiency,excellent fatigue and impact resistance,no need for deceleration device.So our company has designed stacker cylinder for customers from Morocco.

Introduction to stacker cylinder:

If the stacker cylinder slips or crawls, please check whether there is astringency inside the stacker cylinder, because the internal parts of the stacker cylinder are improperly assembled, the parts are deformed, worn or the shape and position tolerance is excessive, the action resistance is too large, so that the piston speed of the stacker cylinder changes with the different stroke position, and the slip or crawl occurs. Most of the reasons are due to poor assembly quality of parts, surface scars or sintered iron filings, so that the resistance increases, the speed decreases. For example, the piston is different from the piston rod or the piston rod is bent, the stacker cylinder or the piston rod is offset from the mounting position of the guide rail, and the sealing ring is too tight or too loose. The solution is to repair or adjust, replace damaged parts and remove iron filings.

We can not just consider the price and ignore the quality when we purchase the stacker cylinders. Now some manufacturers produce unqualified products in order to reduce costs, the piston rod is not adjusted, the rod coating is not enough, the stacker cylinder finish can not reach, the guide sleeve should use copper, but instead of ductile iron, although the cost is reduced, the quality of the stacker cylinder is not required.

The stacker cylinder should be used as far as possible to avoid the transverse force, sometimes the piston rod to bear the transverse load is too large, especially do not force or pull the stacker cylinder, bite. Elimination method: When installing the stacker cylinder, ensure that the axis position of the stacker cylinder is consistent with the direction of movement; Make the load borne by the stacker cylinder as far as possible through the stacker cylinder axis, to avoid the phenomenon of eccentricity.

Classification of stacker cylinder: according to the mode of movement it can be divided into linear reciprocating movement type and rotary swing type; According to the effect of liquid pressure, it can be divided into single acting type and double acting type. According to the structure, it can be divided into piston type, plunger type, multistage telescopic sleeve type, pinion and rack type, etc. According to the installation form can be divided into rod, earring, foot, hinge shaft and so on; According to the pressure grade can be divided into 16Mpa, 25Mpa, 31.5Mpa and so on.

Answers to some questions about stacker cylinder:

Why does the hydraulic cylinder not return?
For a spring return cylinder, it is possible that 1, the spring is damaged. You can check it for processing. 2, the oil in the oil path is not unloaded, causing it to be unable to reset. 3, the cylinder piston is dead, resulting in no position. For double-acting cylinders, it is possible to: 1, the spool is not reversed, or is not changed to the correct position, check whether the reversing valve is normal (and whether there is electricity). 2, the cylinder piston is dead, resulting in no position, check and treatment can be. 3, the return oil pressure is insufficient, the inlet oil is not unloaded, the operation is not smooth. For reference only.

The diameter of the cylinder is 180mm and the pressure is 14mpa. How many tons can the cylinder hold?
Calculate the area of the cylinder, 3.14*9*9=254.34 square centimeters, take the approximate number of engineering, 1 mpa pressure is about 10 kg per square centimeter, 14 mpa pressure is 140 kg per square centimeter, that is 254.34*140=35607.6 kilograms, it can be known that the cylinder can be about 35 tons in theory.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
免费看大鸡巴| 欧美美女潮喷| 亚洲日韩免费在线观看一区免费在线| 午夜成人福利人妻AV| 欧美97大香蕉视频| 操美女b免费视频| 骚逼人妻激情影院| 成人三级片大香蕉| 女子抠逼高潮喷水的网站| 操逼不卡AV| 我要操死你视频网站免费看| 国产一区二区精品自慰| 全国18大,啪啪视频| 青青五月草视频在线播放| 91制服丝袜电影| 中文字幕一区区幕| 大鸡巴狂插美女逼逼| 99亚洲妻在线| 人妻资源在线影音| 久久亭亭五月综合| 日韩欧美性生活视频| 夫妻性爱午夜手机在线视频| 欧美日韩中文字幕电影一区二区三区四区 | 美女的鸡巴 99国产| 骚穴被草喷视频| 色欧美插bAv| 舔骚逼奶头舒服视频啊啊啊啊啊啊| 黄色按摩七月婷婷| 日中国美女骚穴| 大鸡巴操小逼性| 性视频动态久久| 熟女一区二区三区综合| 人妻一区二区三区四区五区| 海拉尔少妇服务| 婷婷春色一区二区| 超碰欧美性欧美最猛性| 色悠悠久久综合亚洲| 韩国大香蕉自拍| 亚洲色图亚洲一区| 在线吃瓜区一| 美女视频第一区|