亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

reset cylinder Sold to Chile

Release time:2023-11-12 15:32:07 Hits: Current position: Home > News

This article mainly introduces:

Chile hydraulic cylinder,reset cylinder manufacturer,reset cylinder

Chile reset cylinder

(Chile reset cylinder,produced by Hengyu Hydraulic Cylinder Factory)

reset cylinder are widely used in Chile,because of simple structure and reliable operation,powerful torque,clever hydraulic energy conversion.So our company has designed reset cylinder for customers from Chile.

Introduction to reset cylinder:

The commonly used buffer structure of the reset cylinder is composed of a piston boss and a reset cylinder head groove. When the piston moves close to the reset cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

The reset cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

reset cylinder head explanation: low pressure castings, medium and low pressure with HT300 gray iron, medium and high pressure with 35, 45 steel. When the reset cylinder head itself is the guide sleeve of the piston rod, the reset cylinder head is best cast iron. At the same time, brass, bronze or other wear-resistant materials should be fused on the guide surface. If the guide sleeve is pressed into the reset cylinder head, the guide sleeve shall be wear-resistant cast iron, bronze or brass.

Most of the failure of the reset cylinder is because there is a foreign body in the reset cylinder into the failure of the reset cylinder, the most problematic is that it is difficult to determine when the foreign body is into the reset cylinder. After a foreign body enters, if the outer side of the sliding surface of the piston is equipped with a seal with a lip edge, then the lip edge of the seal can scrape the foreign body when working, which is beneficial to avoid scratching. However, the piston equipped with 0-shaped sealing ring has a sliding surface at both ends, and foreign bodies are sandwiched between this sliding surface, which is easy to form scars.

Answers to some questions about reset cylinder:

What is the difference between single acting hydraulic cylinder and double acting hydraulic cylinder?
Single action hydraulic cylinder is a single direction force work, the return of the plunger depends on itself or the weight of the mechanism to return. The double acting hydraulic cylinder is mainly different from the extension and retraction of the piston (the thrust and tension of the saying), which are all operated by the action of liquid pressure.

How to refuel pneumatic riveting cylinder?
First put the gun flat, that is, horizontally, while pushing the stroke positioning pin and loosen the back cover, rotate to the left for a maximum of five turns, and then use a wrench to loosen the oil sealing screw, slowly add the hydraulic oil and let the air out, fill up to tighten the oil sealing screw. This process of adding hydraulic oil is over.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
制服 中文 人妻 字幕丝袜| 国产美女日| 五月激情a级片| 亚洲 人妻 都市 日韩| 操骚货逼| 天天操天天干人人操| 性视频欧美日韩| 欧洲二三区| 日本在线视频大香蕉| 操的舒服视频| 91免费大香蕉| 蜜臀中文一区| 激情网,五月婷| 91在线视频精品一区二区三区| 大香蕉ww| 东京热中文字幕无码| 五月婷婷美女自卫| 欧美天天爽| 日韩网上性爱视频网站。| 91熟女刺激专区| 日韩精品大鸡巴抽插| 亚洲性爱视频大鸟视频| 日本有码人人色| 极品嫩模高潮娇喘到呻吟色欲| 视频女女免费操逼| 大香蕉欧美精品| 美女视频操逼131| 黄色一级视频在线播放| 熟女五十路免费视频| 99福利网站在线观看视频| 亚洲一区在看| 大香蕉视频色中文| 国产含鸡巴| 欧美人妻三级在线现看中文| 啊啊啊,被艹的好舒服哦视频| www.骚五月.com| 插b美女插插b| 国产又黑又大又粗| 日本Z在线播放| 大香蕉视频播放午夜播放| 鸡扒插入在线观看|