亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

push and pull the cylinder Sold to Azerbaijan

Release time:2023-11-12 15:31:20 Hits: Current position: Home > News

This article mainly introduces:

Azerbaijan hydraulic cylinder,push and pull the cylinder manufacturer,push and pull the cylinder

Azerbaijan push and pull the cylinder

(Azerbaijan push and pull the cylinder,produced by Hengyu Hydraulic Cylinder Factory)

push and pull the cylinder are widely used in Azerbaijan,because of no need for deceleration device,long service life,smooth movement.So our company has designed push and pull the cylinder for customers from Azerbaijan.

Introduction to push and pull the cylinder:

The meaning of the push and pull the cylinder model marked by the push and pull the cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the push and pull the cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the push and pull the cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

When the push and pull the cylinder is repaired, its inner and outer diameter and roundness should be accurately measured. If the inner hole of the push and pull the cylinder is badly worn, it can be repaired by grinding the mandrel or honing on the boring machine. If the piston is worn, it can be repaired by electroplating, and serious wear should be replaced.

When the push and pull the cylinder is customized, if there are high requirements for the quality of the push and pull the cylinder, it is best to use rolling processing, because the surface layer has surface residual compressive stress, which helps to close the surface of the small crack, preventing the expansion of erosion. Thus, the corrosion resistance of the surface can be improved, and the fatigue crack can be delayed or expanded, and the fatigue strength of the push and pull the cylinder can be improved. By rolling forming, a cold working hardening layer is formed on the rolling surface, which reduces the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear resistance of the inner wall of the push and pull the cylinder and avoiding the burn caused by grinding. After rolling, the reduction of surface roughness value can improve the matching property.

push and pull the cylinder body inspection: The inner surface of the push and pull the cylinder and the piston seal are the main factors causing the leakage in the push and pull the cylinder, if the push and pull the cylinder has a longitudinal tensile mark, even if the new piston seal is replaced, it can not effectively eliminate the fault, the inner surface of the push and pull the cylinder mainly checks whether the dimensional tolerance and shape and position tolerance meet the technical requirements, there is no longitudinal tensile mark, and measures the depth of the longitudinal tensile mark, in order to take the corresponding solution.

Answers to some questions about push and pull the cylinder:

What does the maximum output force of the cylinder piston mean?
The maximum output of the cylinder is related to the pressure of the hydraulic system that you link to the cylinder. For example, the rated maximum output thrust of the MOB 50 cylinder is 1.3 tons and the rated pressure is 7Mpa. That is, when the input hydraulic oil pressure of the cylinder reaches 7Mpa, the maximum output thrust of the cylinder is only 0.98 tons. When the input hydraulic pressure is only 5Mpa, the maximum output thrust of the cylinder is 1.3 tons. Because the pressure of the cylinder limit is only 7Mpa, if the oil pressure of the input system exceeds 7Mpa, the cylinder can not withstand the pressure burst, and it is damaged.

What adhesive should be used when the cylinder is cracked?
There is a kind of cast iron glue, industrial products market can buy, A, B formula, that is, a tube is A, a tube is B, when used proportionally prepared, check the instructions. Polish the glue after it dries, and then grind it again.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
欧美日韩内地啪啪啪| 操我操的好舒服在线看| 国产av 日韩| 蓝山县| 蜜臀www久久| 嗯嗯啊啊啊嗯| 91精品推荐| 大黑屌国产| 内射操黑丝美女免费| 日本男女大鸡巴插入国产| 日本有码高清视频在线观看| 国产又粗又猛又爽又黄又高潮的视频 | 大鸡巴插逼国产| 高大鸡巴视频在线| 嗯嗯嗯国产综合视频| 欧美黄色性生活| 人人视频一区| 逼逼逼插插| 看毛片一二三四区| 丝袜足交亚洲一区| 日本一区二区舔阴视频| 美女C大鸡巴操逼| 我要操五月天老司机成人网| 综合亚洲激情网| 亚洲熟女29P| 亚洲操逼爽片| 鸡巴一区二区三区四区| 黄色色婷久久久| 久久看蜜臀视频网站| 五十路熟妇高熟无码15P| 熟女 精品 一区 综合| 亚洲aM一99视频| 97大香蕉免费| 中日乱码在线一区二区三区在线观看 | 曰B| 亚洲瘦老头玩弄呻吟| 精品18视频免费观看| 日韩操鸡视频网站在线观看| 中文AV在线播放| 91做鸡视频| 久久亚洲无码肛交|