亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

servo hydraulic cylinder Sold to Norway

Release time:2023-11-12 15:30:49 Hits: Current position: Home > News

This article mainly introduces:

Norway hydraulic cylinder,servo hydraulic cylinder manufacturer,servo hydraulic cylinder

Norway servo hydraulic cylinder

(Norway servo hydraulic cylinder,produced by Hebei Hengyu company)

servo hydraulic cylinder are widely used in Norway,because of high work efficiency,long service life,smooth movement.So our company has designed servo hydraulic cylinder for customers from Norway.

Introduction to servo hydraulic cylinder:

If the seal of the servo hydraulic cylinder is softened and sticky, it may be that the seal is incompatible with the hydraulic oil or the nearby lubricating oil, replace the appropriate seal; If the seal becomes hard and loses elasticity, most of it is because the ambient temperature is too high (more than 80 ° C), make appropriate temperature insulation protection or replace the high temperature seal.

servo hydraulic cylinder can not drive the load troubleshooting: oil pressure is too low. servo hydraulic cylinder selection specifications are too small. Leakage in servo hydraulic cylinder or associated hydraulic system element.

Analysis of commonly used seals: The wear ring and slip ring commonly used on the servo hydraulic cylinder are generally made of polytetrafluoroethylene + graphite, because pure polytetrafluoroethylene is easy to produce plastic creep, which is only suitable for low pressure and low wear resistance conditions. If the sealing ring used is a composite material formed after adding graphite filler, the performance can be effectively improved, the ability to resist plastic creep is increased by 2 to 3 times, the initial deformation caused by the load is reduced by 30 to 60% : the rigidity is increased by 2 to 3 times: the dimensional stability under heat is increased by 2 times, and the hardness is increased by l0 to 15%.

The role of the servo hydraulic cylinder in the mold industry: the servo hydraulic cylinder has a variety of uses in the mold, one is that the core distance is very large, or because of the mechanism of the product, only the servo hydraulic cylinder is reasonable or more cost saving. Let the side core be extracted before opening the mold. Hot runner is mainly based on the product to decide, sometimes customers require the use of hot runner, the price is more expensive, but there are many benefits, you can save raw materials, shorten the molding cycle The servo hydraulic cylinder has an irreplaceable role in the heavy industry production process: it is mainly used in places that need to support heavy objects for a long time, and it can still support heavy objects when the oil pressure is removed, and it is safe and reliable. Can be used underwater, single action, load reversion, nut self-locking to make the load safer, especially in large projects, is easy to operate control and self-locking jack, designed with a safety pressure retaining device, built-in pressure relief valve to prevent overload, to protect the self-locking jack to facilitate safe operation. The connection of the device is connected by high pressure hose and threaded joint, which has the advantages of fast use and overcoming the shortcomings of fast traditional joint oil leakage. It is mainly used for equipment installation and toppling operation in various industries such as electric power, construction, machinery manufacturing, mining, railway bridge, shipbuilding and so on.

Answers to some questions about servo hydraulic cylinder:

How big is a 300-ton cylinder piston?
The rated pressure of the oil pump is 31.5 mpa, the nominal pressure of the hydraulic press is 3150 kN, then the calculated cross-sectional area of the cylinder: S=3150000/31500000=0.1 square meters diameter is: 2* root sign (0.1/3.14) =2*0.178 m =0.356 m 3150 kN hydraulic press is commonly equipped with 31.5 mpa 63 l/min axial piston pump. There are many variable forms of axial piston pump, and the motor size of the pump with the same flow and pressure is not uniform. 31.5 mpa 63 L/min automatic variable pump, can be equipped with 15 kW 4 stage motor; The manual variable pump needs to be equipped with 22 kW 4-stage motor.

What are the four cylinders of the truck crane?
The four cylinders of the truck crane generally refer to the telescopic cylinder of the boom (to adjust the length of the boom), the variable amplitude cylinder of the boom (to adjust the elevation Angle of the boom), the horizontal telescopic cylinder of the support leg and the vertical cylinder of the support leg.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
成人熟女人区一三区| 国产老头操逼视频| 台湾佬中文娭乐网2| 午夜激情女人视频| 日韩中文字幕区4| 巨大黑人人妻| 青青草原色中色字幕在线字幕| 来个国产免费操逼| 国家Av在线导航| 免费看日逼的视频| 密臀色欲AV一区二区三区| 欧美国产日韩在线观看成人,| 欧美性放荡在线观看| 男生和女生操91| 三级啊啊啊啊| 亚洲精品丝袜一区二区| 啊啊嗯嗯视频免费| 西西人体艺术av无码乱码在线观看 | 老外大鸡巴视频欧美大| 俄罗斯老肥妇黄色尿尿视频| 大鸡巴日小骚逼动态视频| 日本一区日逼| 久久中文字幕在| 熟妇互换AV| 又粗又硬的日逼视频| 插呀插呀插在线免费| 大香蕉网~日韩| 中文字幕久久熟女| 欧美熟妇吃鸡巴| 久久久男小黄片| 最近最新中文字幕第二区第三区| 啊啊啊好爽啊啊啊视频| 成人在线免费视频导航| 激情五月婷婷婷| 男女嫩操AV| www,日比| 被大鸡吧爆操的美女| 操逼鸡巴| 大鸡吧操逼爽视频在线观看亚洲| 黄色极品视频在线| 深夜福利男女激情啪啪网站|