亚洲色图10p,xxx.,欧美日韩国产激情一区二区三区,久久久久人妻精品一区二区三区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

automatic reversing cylinder Sold to Germany

Release time:2023-11-12 15:27:49 Hits: Current position: Home > News

This article mainly introduces:

Germany hydraulic cylinder,automatic reversing cylinder manufacturer,automatic reversing cylinder

Germany automatic reversing cylinder

(Germany automatic reversing cylinder,produced by Hengyu Hydraulic Cylinder Factory)

automatic reversing cylinder are widely used in Germany,because of smooth movement,clever hydraulic energy conversion,no need for deceleration device.So our company has designed automatic reversing cylinder for customers from Germany.

Introduction to automatic reversing cylinder:

Before the automatic reversing cylinder is removed, the relief valve should be loosened to reduce the pressure of the hydraulic circuit to zero, and then the power supply should be cut off to stop the hydraulic device. After loosening the oil port piping, the oil plug should be applied to plug the oil port.

Under normal circumstances, the automatic reversing cylinder is composed of the rear end cover, body, piston, piston rod and front end cover and other main parts. In order to prevent the working medium from leaking out of the automatic reversing cylinder or from the high pressure chamber to the low pressure chamber, a sealing device (sealing ring) is arranged between the automatic reversing cylinder and the end cover, the piston and the piston rod, the piston and the automatic reversing cylinder, the piston rod and the front end cover. A dustproof device is also provided on the outside of the front end cover. In order to prevent the piston from impacting the end cap when it moves rapidly to the end of the stroke, the end of the automatic reversing cylinder can also be provided with a buffer device. If necessary, the exhaust device should be set in order to exhaust.

Before the automatic reversing cylinder is removed, the system should be unloaded, the loop pressure is zero, the oil source should be cut off, and the oil port should be blocked after the oil port distribution pipe is loosened.

The automatic reversing cylinder requires that the filtration accuracy of the system is not less than the 80um, and the oil pollution should be strictly controlled, the oil should be kept clean, the performance of the oil should be checked regularly, and the necessary fine filtration and replacement of new working oil should be carried out.

Answers to some questions about automatic reversing cylinder:

Why the cylinder cannot operate normally after the explosion-proof valve is installed?
The pipeline explosion-proof valve is specially designed to prevent pipeline damage and free fall of the cylinder, so there must be back pressure to open. If there is no oil return pressure, or the oil return pressure is too small, and can not adjust the oil return pressure, such a system with explosion-proof valves is more troublesome, it is recommended to add a one-way throttle valve between the cylinder and the tank to establish back pressure. If you understand the explosion-proof valve, you can also try to adjust the opening of the valve (that is, the flow of the regulating valve), and adjust the opening to help the valve to open.

How to judge the leakage in the cylinder?
Common judgment method: In the production site, people make full use of watching, listening, smelling, touching and other sensory ways, by observing that the cylinder can not move or delay the action or feel the oil temperature change, vibration and noise, etc., and then judge whether the cylinder has internal leakage according to experience. Another method commonly used in the field is to extend the cylinder in place to ensure that the cylinder does not have any load and will not retract (to prevent the cylinder from internal leakage accidents), turn off the machine, and then remove the tubing with the rod cavity, and then press the switch that pulls out the cylinder (do not press the wrong switch). If the oil nozzle with the rod cavity drains the cylinder internally, If there's no oil coming out, you have to think about something else going wrong.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
日韩高跟美女日逼视频| 中文字幕一区二区三区的区在线| 操老女人的逼逼视频| 韩日五十路老熟女| 成人欧美风另类图片一区二区三区三州 | 国产夫妻内射自拍| 大鸡巴肏屄视频午夜成人| 麻豆日韩精品| 婷婷激情一起草| 波多小福利| 亚洲岛国视频| 欧美日韩夫妻精品自拍| 把美女操的高潮迭起的视频使劲插美女| 久久人妻影视一区二区三区| 三上悠亚黑人一区无码| 极品骚穴视频在线| 日韩夫妻精品| 亚洲综合成人导航一区图片黑料| 色婷婷久久综合亚洲精品| 黑老日欧美韩国老女人啪啪| 舔大鸡吧插逼免费视频| 丰满人妻激情网| 97人人妻人人| 欧美黑人大鸡巴性猛干| 熟日本一区色中文字幕熟| 人妻意外中出在线中文字幕| 日韩欧美一级毛片| 亚洲精品乱玛| 国产日韩欧美中文海角九一| 五月综合日韩亚洲| 国产又粗又大又长又黄在线观看 | 国产又大又粗又硬一区二区三区| 熟女地址一二一起草| 乌拉特前旗| 国产在线熟女| 国产最新不卡操逼| 国产av街头| 人妻意外中出在线中文字幕| 三级影视香蕉大全久久久| 午夜趴趴一区二区都可以| 欧美日韩操逼xxxx|